Complete Engine Monitoring for Boats
Complete System Build a complete engine-monitoring dashboard with 8 gauges: 4× Temperature (DS18B20) + 1× Tachometer (RPM) + 1× Oil Pressure + 1× Fuel Tank Level + 1× Engine Hours. All sensors feed a single ESP32 running ESPHome, visualised in Home Assistant. 4× Temp gauges 1× Tachometer 1× Oil pressure 1× Tank level 1× Engine […]
Oil Pressure monitor with ESP32, INA219
🔗 Full Guide · Transcript Build a digital oil-pressure monitor using an ESP32 “remote hub,” an INA219 board over I²C, and Home Assistant/ESPHome. This guide follows every technically relevant step from the video: soldering the INA219, wiring to the ESP32, tapping the existing oil sender’s “Gauge” terminal, adding INA219 in ESPHome, calibrating volts→bar from two […]